Volvo Common ECU Faults

This is a very common failing Volvo instrument cluster that will cause complete failure of all dials and gauges, back lights and display. We are currently rebuilding customers own units with a lifetime warranty as standard...

The frequent failures of Haldex ECUs can leave drivers with an illuminated traction control light and frustrating communication faults...

Very common problem, causing limp mode function activation and idle speed faults.

Common fault causing the traction warning message and the fault codes: BCM-0130 Brake pressure sensor 1.

- 1996-1997 Volvo 850 with TRACS 2/4WD ABS system
- 1998-2001 Volvo C70, S70 and V70 with TRACS ABS system
- 2/4WD Volvo ABS system
- 1999 and newer Volvo S80 with ABS/STC system


ECU Type - ATE Teves


ECU location: Fitted to the back of the ABS pump (held on with four torx screws that are easily removed with a 4mm socket).

This is a very common failure on all Volvo ABS pumps built after 1995, causing the ABS light to come on along with the traction control light if fitted. When the fault codes are read there will usually be a fault code blaming the high pressure pump and/o ra fault code blaming one or more wheel speed sensors. The fault is normally always the ABS module when these faults occur.

It is worth noting that the ABS module can be removed and the pump left in place thus allowing the vehicle to be driven with normal braking (no ABS).

Volvo Products/Services

850

C30

C70

EC140B

EC160B

EC180B

EC180BLC

EC210B

EC240B

EC290B

EC360B

EC700B

EW140B

EW145B

EW160B

EW180B

EW200B

FH12

FH13

FL

FM

S40

S60

S70

S80

V40

V50

V60

V70

XC60

XC70

XC90