Audi 01435 Brake Pressure Sensor 1 Fault

For well over a decade the error code 01435 – Brake Pressure Sensor 1 has been causing Audi owners, and technicians, heartache around the globe. This fault is a common problem in models built between 2000 and 2015, and directly affects the vehicle’s braking efficiency, potentially leading to more dangerous driving conditions if not addressed.

This fault commonly causes the ABS warning light to illuminate on the dashboard, often being joined by the ESP or traction control warning light. Although these problems will be intermittent at first, they will quickly become permanent if not resolved as soon as possible. An internal malfunction of the ABS pump and module can cause inaccurate measurements of hydraulic pressure which will trigger the 01435 – Brake Pressure Sensor 1 fault code to be stored.

Running diagnostic tests on the vehicle will help identify other fault descriptors that may also appear under 01435. These will have different descriptions, such as ‘Electrical Fault in Circuit’, ‘Implausible Signal’, and ‘No or Incorrect Basic Setting / Adaptation’ but will all be associated with the same sensor.

Manufacturers typically recommend a costly fix to this issue, a complete replacement of the ABS pump and module. This includes additional labour costs for programming and will only come with a short 1-year warranty.

There is no need to worry. We provide a cost-effective test and rebuild solution that sees your faulty ABS pump and module rebuilt within 2-3 working days, eliminating the Audi 01435 fault code and preventing it from ever returning.

 

 

 

The Brake Pressure Sensor Fault Affects:

 

Models produced between 2000-2013 commonly experience an illuminated ABS warning light, and the Audi 01435 error once the ABS has failed. Click here to get the ABS rebuilt.

 

 

 

 

Models manufactured between 2004 and 2015 frequently suffer from ABS failure. If there is a constant ABS, ESP, or traction control warning light on the dash, and the dreaded Audi 01435 code has been diagnosed, click here to get the faulty ABS rebuilt.

 

 

 

 

Audi A6 or Q7 (2004-2011) models are prone to developing a faulty ABS pump and module. Symptoms such as an illuminated ABS light and braking problems are common signs of this failure. Click here to find out more about our ABS rebuild solution.

 

 

 

2005 to 2015 models that experience a constant ABS light and the frustrating Audi 01435 code have a faulty ABS unit. Click here to get the failed ABS rebuilt by our technicians.

 

 

 

Older models built from 2000 to 2010 can suffer from a faulty ABS. If the car shows symptoms such as a persistent ABS warning light, and diagnostics have detected the irritating Audi 01435 fault, then the ABS has failed. Click here to learn how to get the unit rebuilt.

 

 

 

 

Test and rebuild:

Each Audi ABS unit we receive undergoes rigorous testing on our custom-built Hardware In-the Loop testing rigs, this is followed by visual component inspections by our technicians. If any parts are identified as faulty, they are replaced by components that surpass standard ratings, guaranteeing that the rebuilt ABS unit will not fail again.

 

Programming:

We keep all original coding when the unit is going through the rebuilding process, there will be no need for any additional programming.

 

Quality:

With a defect rate of 0.49%, we are proud to be the trusted primary service provider of remanufacturing services for a wide range of major franchise dealerships and specialists throughout the world.

 

Warranty:

Lifetime unlimited mileage*

 

How do I get my unit rebuilt?

To pay for the rebuild click the links above, select your part number and click: Get yours rebuilt.

Print the payment/booking confirmation email.

Package the Audi ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your Audi ABS with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

 

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the ABS inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your ABS unit and call you to advise on the outcome of testing, if your ABS is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your Audi ABS and return it to you with an unlimited mileage warranty.

If you require further information regarding this Audi ABS Pump and Module then please contact us.