Audi ACC Camera ECU Repair – Causing C110702

Is your Audi showing an ‘Active lane assist: currently unavailable. No camera view’ message as soon as you turn the ignition on? Do you have a C110702 code stored when checking diagnostics? It sounds like your Audi ACC (Adaptive Cruise Control) camera control module has malfunctioned and needs to be repaired.

SHOP NOW - Audi ACC Camera Module Rebuild

The ACC camera and module combined (J852) supports your vehicle’s Advanced Driver Assistance System (ADAS). Functioning together with the ACC radar sensor (J428) located inside the front grille, these sophisticated modules help your Audi to better understand its surroundings for safe and proper ADAS deployment.

You’ll find your Audi’s ACC camera module (J852) positioned at the top of the windscreen, tucked just behind the rear-view mirror.

When this important module fails, you’ll inevitably be unable to activate cruise control or lane assist. Even more annoyingly, you’ll be greeted by the ‘active lane assist currently unavailable no camera view’ message as soon as you start the vehicle up.

When attempting to investigate this issue with diagnostic tools, you’ll no doubt uncover the code ‘C110702 - Video line for image processing Signal error’ stored. These symptoms indicate your Audi ACC camera module needs to be repaired having suffered a common malfunction - internal component breakdown.

ACC Camera Module: Repair or Replace?

When attempting to repair your Audi ACC camera issues, you might have considered purchasing a replacement unit. However, a brand-new module may carry the same issue, leaving you vulnerable to the dreaded ‘active lane assist currently unavailable no camera view’ message in the future.

The most effective way to remedy code C110702 and your ACC camera-related problems, is to have the J852 module professionally rebuilt. This way, the initial malfunction is completely removed from your ECU and it’ll cost much less than a new unit.

A rebuild goes a step further than an Audi ACC camera repair. Rather than just switching a couple of faulty components, a rebuild completely strengthens your module internally, providing your Audi with a much longer-lasting solution for code C110702.

Our comprehensive test-and-rebuild process takes just 2-3 working days and we’ll cover you with unlimited-mile lifetime warranty too. Our expert technicians only rebuild with higher-than-OEM-standard components to upgrade unit durability and resolve your Audi’s C110702 code for good!

Finally deal with that annoying ‘active lane assist currently unavailable no camera view’ message on your Audi – get your ACC camera module rebuilt now. Fill out our quick-and-easy test form to get started.

Common Failure symptoms:

• Loss of cruise control
• Loss of lane assist
• ‘Audi active lane assist: Currently unavailable. No camera view’ message on dashboard
• Inactive collision warning

Common fault codes:

• B200000 - Control unit faulty
• C110400 - Camera fault
• C110702 - Video line for image processing signal fault
• C110800 - Function restriction due to missing image information
• U111200 - Function restriction due to an implausible message

Test and rebuild:

Our technicians will analyse your faulty control module on state-of-the-art testing rigs, which simulate realistic driving conditions. This is done before and after the rebuilding process, to ensure your ECU is ready to be returned to your vehicle.

Programming:

Don’t worry, you won’t need to shell out anything extra for dealer-level recoding. All programming information is retained throughout our process, so you can simply refit your rebuilt control module as soon as you receive it back from us.

Quality:

We are a trusted provider of automotive remanufacturing for industry specialists worldwide. This is because we take quality seriously, exemplified by our proud defect rate of 0.49%.

Warranty:

Lifetime unlimited mileage*

How do I get my unit rebuilt?

To pay for the rebuild click the Shop Now link above, select your part number and click: Get yours rebuilt.

Print the payment/booking confirmation email.

Package the ACC camera module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your control module with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the ACC camera module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your ECU and call you to advise on the outcome of testing, if your unit is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your control module and return it to you with an unlimited mileage warranty.

If you require further information regarding this Audi ACC camera repair, then please contact us.