Jeep Compass and Wrangler JK ABS faults

Common causes of an ABS and traction control warning light is often a faulty Jeep Compass/Wrangler JK ABS pump and module. If the ABS light is present in your Jeep, it is important to have it checked as soon as possible, this is because an ABS fault can lead to issues with braking performance, and could eventually result in an accident.

Through diagnostic scans on the vehicle, the stored fault codes C2116 – ABS Pump Motor Low Voltage, is likely to be identified. Further checks of the vehicle will also often show that the voltage input values for the ABS are correct, despite this, the fault code will still be logged, due to an internal components breaking down within the unit.

Mechanics will often be able to resolve this ABS issue, by purchasing a replacement unit, however, expensive and backordered stock means that it is not always the most effective solution. The new replacement ABS will need to be re-programmed to your car, at an additional expense, and you will likely encounter the same fault again in the future, as the original design flaw has not yet been fixed at a production level.

However, we have a better solution, that will save you time, money, and the heartache of going through all of this again…

We offer a full test and rebuild of your existing Jeep Compass or Wrangler JK ABS, with all of the original coding of the unit remaining intact, and the rebuilding process will be completed within 2-3 working days, and an unlimited mile lifetime warranty will be provided as standard.

Common Failure symptoms:

• No emergency braking assistance
• ABS light
• Traction control light

Common fault codes:

• C2116 - ABS Pump Motor Low Voltage

Location on the vehicle:

Jeep Compass	Jeep Wrangler JK

Common failing part numbers:

Compass

• 25.0212-1845.4 / P68091115AD
• 25.0212-1628.4 / P68049215AE
• 25.0926-4373.3 / P52128993AE
• 28.5265-2303.3 / P68049210AD
• 28.5263-7800.3 / P04877068AA
• 25.0212-0732.4 / P68028210AC
• 28.5265-2502.3 / P04877039AC
• 25.0212-2235.4 / P68212478AB
• 25.0212-0622.4 / P005272897AB
• 25.0212-0732.4 / P68028210AC
• 25.0212-2177.4 / P68212478AA
• 25.0212-0576.4 / P68028210AB
• 25.0212-0919.4 / P68028215AD
• 25.0212-0574.4 / P68028215AB
• 25.0212-1845.4 / P68091115AD

Wrangler

• 25.0212-1792.4 / P05154212AD
• 25.0212-2186.4 / P68230240AB
• 28.5266-3602.3 / 25.0212-2217.4
• 28.5260-6901.3 / P52126282AC
• 28.5266-3603.3 / P68284715AB

(The above part numbers are just a small selection of common failing Jeep part numbers, there are many more including multiple superseded part numbers so if you do not see your part number here then please see our full catalogue for Compass or Wrangler).

Test and rebuild:

The quality of our workmanship is second to none. We don't just replace parts when they fail, we engineer out all defects and design flaws during the process so you can be sure that your pump and module will last longer than any new pump would, this is how we can confidently provide our Lifetime Warranty.

Programming:

No need for expensive programming once you receive the ABS back. Just fit, bleed and away you go.

Quality:

Each rebuild is subject to our strict Lifetime Warranty standards before it leaves the premises. Every step of this process including testing, components, ESD safety and workmanship can be seen in a defect rate no higher than 0.49% across all of our services.

Warranty:

Lifetime unlimited mileage*

How do I get my unit rebuilt?

To pay for the rebuild click the Shop Now link above, select your part number and click: Get yours rebuilt.

Print the payment/booking confirmation email.

Package the ABS unit inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received we will test, rebuild and return your Jeep ABS pump and module with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)

What if I don’t want to pay up front?

This is not a problem, if you prefer this option then follow the following steps:

Fill in and submit this test form.

Print the booking confirmation email.

Package the ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).

Send us your package by tracked courier (the shipping instructions are on the confirmation email).

Once received, we will test your unit and call you to advise on the outcome of testing, if your ABS is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.

We will then rebuild your Jeep Wrangler/Compass ABS and return it to you with an unlimited mileage warranty.

If you require further information regarding this Jeep ABS pump and module then please contact us.