C30/C70/S40/V50 ABS Pump Module Fault
Volvo C30, C70, S40 & V50 ABS Pump Module fault
Fault codes: BCM-0130 Brake Pressure Sensor 1. Signal too low or BCM-0130 Brake Pressure Sensor, Signal Missing.
This ABS Pump Module is a common failure for the Volvo C30, C70, S40 & V50 vehicles built between 2004 - 2012. The fault causes the ‘Anti-Skid Service Required’ message to illuminate permanently on the instrument cluster.
If you have taken the vehicle for diagnostics, they will probably have told you that you have a fault with your “Brake Pressure sensor” or given you the full fault code of: BCM-0130 Brake Pressure Sensor 1, Signal Too Low or BCM-0130 Brake Pressure Sensor, Signal Missing and will probably have told you that you must change your ABS Pump Module at an incredible cost, plus fitting costs.
We offer a more suitable and more economical solution, we rebuild/repair your existing ABS pump and module.
When we rebuild your ABS pump, we not only correct the problem but the materials and processes we use will reinforce your ABS pump module to prevent the fault recurring.
Common Failure symptoms:
- ABS warning light
- Anti-Skid Service Required message on the cluster
Common fault codes:
- BCM-0130 Brake Pressure Sensor 1, Signal Too Low
- BCM-0130 Brake Pressure Sensor, Signal Missing
Test and rebuild:
Every Volvo ABS pump and module is comprehensively tested on our bespoke testing rigs under real-world load and driving conditions. Once all faults have been identified our technicians move onto the rebuild stage. Each ABS unit is stripped and rebuilt using only higher than standard rated components to ensure that it does not fail again.
Programming:
No need for programming when you install this back onto the vehicle.
Quality:
With a work defect rate lower than 0.49% across all our rebuilds and an extremely high set of lifetime warranty standards, including testing, workmanship, ESD safety and components you can be assured of our quality of work.
Warranty:
Lifetime unlimited mileage*
How do I get my unit rebuilt?
To pay for the rebuild select your vehicle or part number above and click: Get yours rebuilt
Print the payment/booking confirmation email.
Package the Volvo ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).
Send us your package by tracked courier (the shipping instructions are on the confirmation email).
Once received we will test, rebuild and return your Volvo ABS pump with an unlimited mileage lifetime warranty. (if your unit turns out not to be faulty then we will refund your payment less a small testing fee and return shipping)
What if I don’t want to pay up front?
This is not a problem, if you prefer this option then follow the following steps:
Fill in and submit this test form.
Print the booking confirmation email.
Package the Volvo ABS pump and module inside a sturdy box with plenty of packaging material (make sure you include your confirmation email in the box).
Send us your package by tracked courier (the shipping instructions are on the confirmation email).
Once received, we will test your ABS pump and call you to advise on the outcome of testing, if your unit is faulty and you choose to go ahead with the rebuild then we will take payment over the phone using a debit/credit card.
We will then rebuild your Volvo ABS and return it to you with an unlimited mileage warranty.
If you require further information regarding this Volvo ABS pump and module, then please contact us.