Back to Parts List

Audi TT 1.8 TFSI ECU (DSG Gearbox) - Part No: 0AM927769D / 0AM325025

OEM no: 0AM325025 / 0AM 325 025 / 0AM325025D / 0AM 325 025 D / 0AM325025H / 0AM 325 025 H / 0AM325065 / 0AM 325 065 / 0AM325065N / 0AM 325 065 N / 0AM325025J / 0AM 325 025 J / 0AM927769K - Audi TT - ECU (DSG Gearbox) zoom
Rating 5.00

Send your own unit for rebuild

20
Return Shipping $
Turnaround time 2-3 working days
Programming see details
Rebuild Details full details

PRODUCT INFORMATION

Vehicle Details:

MakeAudi ModelTT Engine Size:1.8 SpecificationTFSI Years:2008 - 2014

Common Faults:

DSG7 mechatronic malfunction for the seven speed gearbox is very common. Holding in gear, loss of drive and poor to no gear selection are common fault symptoms. P1604 - internal control module, P189C - function restriction due to insufficient pressure build up, P17BF – Hydraulic pump play protection and P0562 - system voltage low are common fault codes to be stored when this unit fails. If I purchase this will it cure my fault?

Part Numbers:

VM no: 0AM927769D / 0AM 927 769 D / 0AM927769K / 0AM 927 769 K / 0AM927769G / 0AM 927 769 G / 0AM927769H / 0AM 927 769 H OEM no: 0AM325025 / 0AM 325 025 / 0AM325025D / 0AM 325 025 D / 0AM325025H / 0AM 325 025 H / 0AM325065 / 0AM 325 065 / 0AM325065N / 0AM 325 065 N / 0AM325025J / 0AM 325 025 J / 0AM927769K

Warranty:

Lifetime Warranty*, unlimited mileage
Product Code: DSG325025-S

REBUILD DETAILS

Rebuild details (“Get Yours Rebuilt”): Professional level diagnostic equipment and/or specialist knowledge may be required when reinstalling, clearing of fault codes and professional diagnostic checks should be carried out following installation. In order to get your unit rebuilt you will need to remove the faulty unit from the vehicle and send it to us, we would then test the unit and if it is faulty we would rebuild it then return it to you with a Lifetime* warranty. When you complete payment the unit will be automatically booked in to our workshop and you will receive full step by step instructions for sending the unit to us, you will also be able to track the progress of the unit at every stage using the “Track Your Part” link located at the top of most pages of our website. If the unit turns out not to be faulty then we would refund your payment and just charge a test fee of $70 + return shipping. Please make sure you check the part numbers on the unit match the rebuild service you are purchasing. Not all parts can be repaired. If the part is not repairable, we will refund your payment and ship it back to you. If you send in an item that does not match the one in the description, we will contact you and try to rebuild it if requested. We recommend the following couriers when sending your unit to be rebuilt: DHL Express.

Turnaround time: 
The quoted turnaround is the estimated number of working days we will likely need your unit complete the work. It does not include shipping time, weekends or national holidays. In some instances it may take longer to complete your unit if we need to order parts or if your unit requires extended testing.

2-3 working days

Programming details:
The following descriptions represent the programming state of the unit once you receive it

All original programming will be retained, no need to program anything once you receive the unit back. However In exceptional circumstances we may need to replace the software within your unit (if it is corrupt or causing problems) if this is the case then we will inform you of this before rebuilding the unit. Professional level diagnostic equipment will be required when installing, clearing of fault codes and professional diagnostic checks should be carried out following installation.

Return Shipping: You will need to arrange your own shipping to get the unit sent to us, we recommend using DHL. Quoted shipping is for the return shipping via DHL Express Delivery shipping costs will be confirmed before payment completes. When you complete payment the unit will be automatically booked in to our workshop and you will receive full step by step instructions for sending the unit to us, you will also be able to track the progress of the unit at every stage using the “Track Your Part” link located at the top of most pages of our website.

REVIEWS FOR THIS PRODUCT

Great company 5/5

Did exactly what was promised on the website.

Running perfect now! 5/5

2008 Audi TT DSG transmission, car went into limp mode, engine code of P0776.After resetting and cooling, codes would clear, but go into limp mode as soon as engine is up to temp. ECU Testing described my issue exactly. I shipped the mechatron to them, they were able to repair it in 2 days. I installed the mechatron and followed the instructions exactly. The car is running perfect now and shifts like new. Extremely happy with their service!

RELATED PRODUCTS

Audi TT - OEM no

Part Number:

0AM927769E / 0AM325065T

Audi TT

Engine Size: 1.8

Years: 2015 - 2018