Back to Parts List

Land Rover DISCOVERY 2.5 TD5 ECU (Engine Management) - Part No: 0673 / NNN500250

OEM no: NNN500250 / NNW500330 / NNN500030 / NNW501200                                                                      - Land Rover DISCOVERY - ECU (Engine Management) zoom
Rating 5.00

Send your own unit for rebuild

20
Return Shipping $
Turnaround time 2-3 working days
Programming see details
Rebuild Details full details

PRODUCT INFORMATION

Vehicle Details:

MakeLand Rover ModelDISCOVERY Engine Size:2.5 SpecificationTD5 Years:1998 - 2005

Common Faults:

Land Rover Discovery vehicles between the years 2001 and 2005 are factory fitted with Motorola ECU's which common fail and cause problems such as intermittent to complete non-starting, limited rev's to below 2000 RPM and cutting out whilst driving. When scanned with diagnostic equipment commonly logged fault codes include: 0129 through to 0133 - injectors 1 through to 5 output drive peak too long , 0128 - topside switch failed, gearbox/ABS open load, 0123 though to 0127 - injectors 1 through to 5 output drive peak too long and 0135 through to 0138 - injectors 1 through to 5 output drive open circuit. Other reported faults include failure to communicate with diagnostic equipment, gearbox/ABS open load and no signal to fuel pump relay. If I purchase this will it cure my fault?

Part Numbers:

VM no: 0673 / ANGERS / 3A814059 OEM no: NNN500250 / NNW500330 / NNN500030 / NNW501200

Warranty:

Lifetime Warranty*, unlimited mileage
Product Code: EEM500250

REBUILD DETAILS

Rebuild details (“Get Yours Rebuilt”): Professional level diagnostic equipment and/or specialist knowledge may be required when reinstalling, clearing of fault codes and professional diagnostic checks should be carried out following installation. In order to get your unit rebuilt you will need to remove the faulty unit from the vehicle and send it to us, we would then test the unit and if it is faulty we would rebuild it then return it to you with a Lifetime* warranty. When you complete payment the unit will be automatically booked in to our workshop and you will receive full step by step instructions for sending the unit to us, you will also be able to track the progress of the unit at every stage using the “Track Your Part” link located at the top of most pages of our website. If the unit turns out not to be faulty then we would refund your payment and just charge a test fee of $70 + return shipping. Please make sure you check the part numbers on the unit match the rebuild service you are purchasing. Not all parts can be repaired. If the part is not repairable, we will refund your payment and ship it back to you. If you send in an item that does not match the one in the description, we will contact you and try to rebuild it if requested. We recommend the following couriers when sending your unit to be rebuilt: DHL Express.

Turnaround time: 
The quoted turnaround is the estimated number of working days we will likely need your unit complete the work. It does not include shipping time, weekends or national holidays. In some instances it may take longer to complete your unit if we need to order parts or if your unit requires extended testing.

2-3 working days

Programming details:
The following descriptions represent the programming state of the unit once you receive it

All original programming will be retained, no need to program anything once you receive the unit back. However In exceptional circumstances we may need to replace the software within your unit (if it is corrupt or causing problems) if this is the case then we will inform you of this before rebuilding the unit. Professional level diagnostic equipment will be required when installing, clearing of fault codes and professional diagnostic checks should be carried out following installation.

Return Shipping: You will need to arrange your own shipping to get the unit sent to us, we recommend using DHL. Quoted shipping is for the return shipping via DHL Express Delivery shipping costs will be confirmed before payment completes. When you complete payment the unit will be automatically booked in to our workshop and you will receive full step by step instructions for sending the unit to us, you will also be able to track the progress of the unit at every stage using the “Track Your Part” link located at the top of most pages of our website.

REVIEWS FOR THIS PRODUCT

ECU refurb after Top Switch failure. 5/5

Very good service. Helpful diagnostics and then prompt work on the unit and return. Postage all sorted and straight forward. My Discovery 2 is now not cutting out which is quite handy!! Will use again. (im bound to as i own a Land Rover!!) Thanks Chris

discovery 2 ecu 5/5

sent the ecu to ecu testing.very proffessional company,kept me informed every step of the way.turned it round very quickly.fit the ecu to the vehicle which prior would not start and is now running perfect

RELATED PRODUCTS

Land Rover DISCOVERY - OEM no

Part Number:

2A745224 / NNW004050

Land Rover DISCOVERY

Engine Size: 3.5

Years: 1998 - 2002

 

Land Rover DISCOVERY - OEM no

Part Number:

MSB101261 / MSB101261

Land Rover DISCOVERY

Engine Size: 2.5

Years: 1998 - 2005