Back to Parts List

Peugeot E7 2.0 SE ECU (Engine Management) - Part No: HW9666912580 / 9678514580

OEM no: 9678514580 / 28312280 - Peugeot E7 - ECU (Engine Management) zoom

Send your own unit for rebuild

20
Return Shipping $
Turnaround time 2-3 working days
Programming see details
Rebuild Details full details

PRODUCT INFORMATION

Vehicle Details:

MakePeugeot ModelE7 Engine Size:2.0 SpecificationSE Years:2011 - 2015

Common Faults:

The Engine ECU fitted to the Peugeot E7 is prone to failure, common symptoms include intermittent/ permanent non-starting or cutting out, loss of engine sensor reference voltages and intermittent communication with diagnostics. When this failure occurs any of the following codes may be stored:, P0606 – PCM Processor Fault, P060C – Internal Control Module Main Processor Performance, P2686 – Supply Of Sensors 5V No 3, P2671 - Supply Of Sensors 5V No 2, P0659 - Supply Of Sensors 5V No 1 and P068A – PCM Power Relay De-Energised Too Early. If I purchase this will it cure my fault?

Part Numbers:

VM no: HW9666912580 / HW 9666912580 OEM no: 9678514580 / 28312280

Warranty:

Lifetime Warranty*, unlimited mileage
Product Code: EEM312280

REBUILD DETAILS

Rebuild details (“Get Yours Rebuilt”): Professional level diagnostic equipment and/or specialist knowledge may be required when reinstalling, clearing of fault codes and professional diagnostic checks should be carried out following installation. In order to get your unit rebuilt you will need to remove the faulty unit from the vehicle and send it to us, we would then test the unit and if it is faulty we would rebuild it then return it to you with a Lifetime* warranty. When you complete payment the unit will be automatically booked in to our workshop and you will receive full step by step instructions for sending the unit to us, you will also be able to track the progress of the unit at every stage using the “Track Your Part” link located at the top of most pages of our website. If the unit turns out not to be faulty then we would refund your payment and just charge a test fee of $70 + return shipping. Please make sure you check the part numbers on the unit match the rebuild service you are purchasing. Not all parts can be repaired. If the part is not repairable, we will refund your payment and ship it back to you. If you send in an item that does not match the one in the description, we will contact you and try to rebuild it if requested. We recommend the following couriers when sending your unit to be rebuilt: DHL Express.

Turnaround time: 
The quoted turnaround is the estimated number of working days we will likely need your unit complete the work. It does not include shipping time, weekends or national holidays. In some instances it may take longer to complete your unit if we need to order parts or if your unit requires extended testing.

2-3 working days

Programming details:
The following descriptions represent the programming state of the unit once you receive it

All original programming will be retained, no need to program anything once you receive the unit back. However In exceptional circumstances we may need to replace the software within your unit (if it is corrupt or causing problems) if this is the case then we will inform you of this before rebuilding the unit. Professional level diagnostic equipment will be required when installing, clearing of fault codes and professional diagnostic checks should be carried out following installation.

Return Shipping: You will need to arrange your own shipping to get the unit sent to us, we recommend using DHL. Quoted shipping is for the return shipping via DHL Express Delivery shipping costs will be confirmed before payment completes. When you complete payment the unit will be automatically booked in to our workshop and you will receive full step by step instructions for sending the unit to us, you will also be able to track the progress of the unit at every stage using the “Track Your Part” link located at the top of most pages of our website.